12 safe operating procedures for nail making machine

- Apr 20, 2020-

1. Strictly implement technical regulations, do not violate regulations, ensure safe production, and understand the principles, structure, performance, and purpose;

2. Lubricate the lubrication points of the nail making machine at least 3 times per shift, and check the lubrication of each transmission part frequently;

3. Before starting the nail making machine, the flywheel should be turned by hand for one week, and make sure that there are no obstacles, loose fasteners and hidden dangers before turning on the power;

4. After starting, the standby device must be running normally before you can pull the wire entry handle to make nails. When stopping, the wire entry should be stopped first;

5. Regularly check the quality, length, straightness, nail cap, nail tip, nail knife, nail mold wear of nails during normal production;

6. During the operation of the nail making machine, it is necessary to pay attention to the temperature rise of various friction parts and the occurrence of abnormal sound at any time;

7. Do not adjust the workpiece while the nail making machine is running;

8. When the equipment is running, it is strictly forbidden to touch the running parts of the transmission with hands; it is forbidden to stop the flywheel by hand when stopping, and it is forbidden to stop the punched slider at the top dead center, which will avoid causing stuffy cars;

9. When repairing equipment or electrical appliances, first disconnect the power supply and put someone on the work. It is strictly forbidden to close the door before performing maintenance;

10. Keep the nail making machine tidy. The nail mold should be cleaned frequently. Do not use raw embroidered wire for nail making. Keep the nail knife sharp.

11. Do the daily maintenance and maintenance of the nail making machine according to the regulations; be neat, clean, lubricated and safe;

12. Do not drive with the protective cover removed.

https://www.nailmaking-machine.com