Common faults and solutions during the operation of nail making machine

- Jan 11, 2021-

1. During the use of the nail making machine, a common fault is the cracking of the nail tip. This is a problem that ordinary people who operate the nail making machine will encounter. Although the problem is not big, we still have to solve the problem as much as possible. In case of nail tip cracking, you should stop the machine in time, replace the iron wire, or re-temper the iron wire, produce new iron wire, and clean the garbage in the garbage chute in time to avoid mixed garbage.


2. Regarding the nail tilting problem of the nail making machine, this is also a common problem. The tilting of the nails is mainly due to the deviation of the degree of wear of the blade, which leads to the inconsistent left and right in the nail making process. In response to this phenomenon, the measures that need to be taken include re-sharpening the blade, adjusting the operating height and reasonable position of the shell to ensure the normal operation of the nail making machine.


3. Aiming at the flash problem during the operation of the nail making machine, it is mainly caused by the different increase in the amount of wire. Too much increase in the amount of wire will make the nail machine too late to produce and flash. What we need to do is to standardize the wire. Increase the amount, improve the hardness of the scissors, and better implement the nail making operation.