​Daily maintenance of automatic nail making machine is essential

- Sep 23, 2020-

Machine readiness check

How the machine is ready can be checked by jog or crank. For example, tools and other items are stuck in the machine; whether the orientation of the printing plate equipment is suitable, if it is not suitable, it may damage the printing plate or cause great difficulty in finding the rules; whether the blanket equipment is suitable, if it is not suitable, then It may constitute a printing defect, or the machine may be damaged in severe cases. To  

The lubrication of the machine

First of all, you can check whether the machine's oil circuit is dredged through the oil standard. If there is no oil standard or the oil standard is not clear, emergency parking is required to carefully check whether the oil circuit is leaking. Although the oil leakage of the machine is easy to find, it is very difficult to find its elements. For machines such as sliding bearings, low speed is not conducive to its lubrication, especially jog or low speed work has a greater impact on its lubrication. Therefore, before carrying out such operations, it is best to run the machine idling and lubricate, which is also a primary task that should be done before going to work every day. The oil pump of some machines is driven by the main engine, so when it is reversed, the oil circuit will not only be unable to refuel, but will suck the oil from the oil circuit back to the tank. This is very dangerous, so the reverse should be avoided. The lubrication of some primary parts of the comparison can also be checked by the metal temperature near it. If the temperature is too high, it indicates that there is a problem with lubrication. Automatic nail making machines often have shortcomings and cleaning methods. To

Impact in the working process of the machine

The smaller the impact during the working process of the machine, the better it is for printing, and it can also extend the service life of the machine. Reducing the printing pressure (pressure in a broad sense) is a primary condition to ensure the smooth operation of the machine. Under the condition of ensuring the quality of printing, the smaller the printing pressure, the better. Reducing the speed of the machine is another primary condition for reducing the moment of inertia of the machine. The lower the speed of the machine, the smaller the moment of inertia. Therefore, the machine should not always work at high speed.https://www.nailmaking-machine.com/