​Feeding requirements of nail making machine

- Aug 31, 2020-

The raw material for the nails we process can be round or scrap steel bars. If it is round, the straightener in our feeding device will straighten the steel wire. After straightening, the feeder will feed it . After the mold clamping device completes this process, the iron wire fed from the feeder is cut and pressed according to the specifications. The punching device on the equipment upsets the cut steel wire, the die moves backward, and then the material is discharged. Because of the performance of the nail making machine, the feeding structure of the nail making machine must be in the state of the equipment shutdown before the wire can be introduced manually At the same time, we cannot use the short iron wire processed from waste steel bars to process the nails, which will damage the equipment.

In order to reduce our labor and improve the efficiency of our production, the feeder of the nail making machine must be able to feed automatically. In order to increase the scope of application of the equipment, it is considered that the equipment can not only use a new disk for processing In the production of nails, waste steel bars can also be used for processing and production, so the feeder must be improved to a certain extent, so what are the performances of the new feeder?

1) It has strong adaptability and can be used for the processing and production of low-carbon steel nails of various specifications;

2) The wire feed is uniform, the raw material steel wire cannot be long and short, and the length of the iron wire must be approximately the same;

3) The feeding process of the nail making machine can introduce new raw materials without stopping the equipment;

4) The wire with shorter raw materials can be used to process the nails. In the end, the wire that cannot be processed to produce the nails can fall automatically without manual removal and will not get stuck in the equipment.https://www.nailmaking-machine.com/