Scrap steel wire drawing machine, nail making machine (choose one), polishing machine, packing and factory nail making machine are mainly divided into four parts, the more important is wire drawing. Wire drawing. When making nails after purchase, you must determine what kind of steel bars will be used for nailing in the future, such as new steel bars, waste steel bars, etc.. Waste steel bars are more troublesome to draw, not as fast as new steel bars, but the cost and profit of waste steel bars is very objective The finished wire is drawn at a faster speed, saving a part of manpower. The nailing speed is also very fast. System, after the wire is drawn, the wire is fed through the automatic wire head, and then the drawn wire is then sent to the wire head Inside, the adjusted semi-finished nails are produced. Polishing: Put the semi-finished nails into a polishing machine for polishing. The polishing machine puts sawdust, paraffin, gasoline and other chemical materials into the polishing machine, and then undergoes friction and impact. Throw out shiny nails. Packaging-The above three parts are all important, and the packaging can be customized according to the user's own needs.