Why is the main unit of the drawing machine unable to start and frequent disconnection?

- Jul 24, 2020-

First of all, let's analyze why the wire drawing machine cannot start. In fact, there are many factors for this situation. The reason is that the control power switch of the device is not turned ON. At this time, we should turn the control power switch ON.

The second reason may be caused by the disconnection and shutdown problem in the last production process, or it was caused by the failure to reset in time after the shutdown, then reset can be solved at this time.

The third reason may be that the emergency stop button of the wire drawing machine is not turned off. At this time, the button should be turned off. The fourth reason is that the inverter cannot be turned on due to tripping of the inverter. At this time, you can refer to the information displayed on the inverter display board to operate, and then turn off the main power, wait for 30 seconds and restart.

Another headache is the frequent disconnection of wire drawing machines during operation. This will cause us a lot of waste, so we must solve this problem in a timely manner. The reason for this problem also includes multiple aspects. For example, it may be due to the improper configuration of the eye mold used, and the eye mold should be reconfigured.

In addition, the wire may break due to the excessive speed of the wire drawing machine; or the quality of the wire itself is in question and the wire should be replaced; or the lubricant used has deteriorated and should be Renew, etc.https://www.nailmaking-machine.com/